Macropoxy 646 part b sds.
MACROPOXY 646 FAST CURE EPOXY (PART B), HARDENER: Manufacturer: SHERWIN-WILLIAMS: SDS Revision Date: 1/18/2021: SDS Format: GHS-US : Item Number(s): 360MW8: Manufacturer Model Number(s): SDS Table of Contents Click the desired link below to jump directly to that section in the SDS. SECTION 1. …
Refer to the SDS sheet before use. ... 1 ct Macropoxy 646 SE-Shop Epoxy 4.0-6.0 (100-150) 1 ct Acrolon 218 HS Polyurethane 3.0-6.0 (75-150) ... combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the …ECOLOGICAL INFORMATION. SECTION 13. DISPOSAL CONSIDERATIONS. SECTION 14. TRANSPORT INFORMATION. SECTION 15. REGULATORY INFORMATION. …A two-component, high-solids, fast-drying polyamide epoxy mastic. Designed to protect steel and concrete in industrial exposures, Macropoxy® 646 epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. This product can be applied directly ...SAFETY DATA SHEET. B58B600. Section 1. Identification. Product name : MACROPOXY® 646 Fast Cure Epoxy (Part A) Black. Product code : B58B600. Other means of …Refer to the SDS sheet before use. ... 1 ct Macropoxy 646 SE-Shop Epoxy 4.0-6.0 (100-150) 1 ct Acrolon 218 HS Polyurethane 3.0-6.0 (75-150) ... combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the …
A two-component, 100% solids penetrating epoxy primer. Designed for use as a primer/sealer over marginally prepared steel or concrete surfaces, Macropoxy® 920 Pre-Prime is intended for a variety of industrial and marine applications. Interested in learning more or purchasing this product? MACROPOXY® 646 (Part B) - Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B58V600 MACROPOXY® 646 (Part B) - Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:[email protected]
KM C308-20160824082350. Protective EARTH SHERWIN Coatings WILLIAMS Revised: Jul 7 2016 MACROPOXY@ 646 FAST CURE EPOXY PART A PART B PRODUCT INFORMATION B58-600 B58V600 SERIES HARDENER 4.53 PRODUCT DESCRIPTION MACROPOXY 646 FAST CURE EPOXY is a high solids, high build, fast drying, …
A two-component, high-solids, fast-drying polyamide epoxy. Designed to protect steel and concrete in industrial exposures, Macropoxy® 646-100 Fast Cure Epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. MACROPOXY® 646 Fast Cure Epoxy Coating (Part B), Hardener MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 Prospect Avenue N.W. Cleveland, OH 44115 Telephone Numbers and Websites Product Information (800) 524-5979 www.sherwin-williams.com Regulatory Information (216) 566-2902 www.paintdocs.com …Macropoxy® 646 SE | Sherwin-Williams. A two-component, fast-dry, high-build polyamide epoxy.SDS management, distribution & revision solutions - for every budget. Free access to more than 4.5 million safety data sheets available online, brought to you by 3E. ... Macropoxy 646-100 Fast Cure Epoxy (Part B) Hardener Manufacturer Sherwin Williams Canada Product code B58V620, 646-100 Revision date 2017 September 06 Language English. …
A two-component, high-solids, fast-drying polyamide epoxy mastic.
MACROPOXY® 646-100 Fast Cure Epoxy (Part A) Ultradeep Base Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::
MACROPOXY@ 646 FAST CURE EPOXY PART A PART B PRODUCT INFORMATION B58-600 B58V600 SERIES HARDENER 4 53 PRODUCT DESCRIPTION MACROPOXY 646 FAST CURE EPOXY is a high solids, high build fast drying, polyamide epoxy designed to protect steel and concrete in industral exposures. Ideal for maintenance painting and …MACROPOXY® 646 PW Potable Water Epoxy (Part A) Buff Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::MACROPOXY 646 Fast Cure Epoxy Mastic is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.Flash Point: Part A: 75 °F (24°C) Part B: 78°F (26°C) Reducer / ... 1 Ct. Macropoxy 646 5.0-10.0 (125-250) Steel, Zinc Phosphate/Epoxy/Urethane Topcoat, Atmospheric ... Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. ContactMACROPOXY@ 646 FAST CURE EPOXY PART A PART B PRODUCT INFORMATION B58-600 B58V600 SERIES HARDENER 4 53 PRODUCT DESCRIPTION MACROPOXY 646 FAST CURE EPOXY is a high solids, high build fast drying, polyamide epoxy designed to protect steel and concrete in industral exposures. Ideal for maintenance painting and …Jul 19, 2016 ... Macropoxy 646 @ 6.0 mils (150 microns) dft. 1 ... Refer to the MSDS sheet before use. ... Then combine six parts by volume of Part A with one part ...• Approved topcoat for NEPCOAT System B P $ 1 %. 1,-" $ C ' 1 " 3 $ 1 (2 3 (" 2 Substrate*: Steel Surface Preparation*: SSPC-SP10/NACE 2 System Tested*: 1 ct. Macropoxy 646 @ 6.0 mils (150 microns) dft 1 ct. Acrolon 218 HS Gloss @ 4.0 mils (100 microns) dft *unless otherwise noted below Test Name Test Method Results Abrasion Resistance1 ASTM ...
A two-component epoxy polyamide mastic coating. Designed for application to properly prepared steel surfaces, Macropoxy® HS High Solids Epoxy may be used as a one, or two-coat, direct-to-metal protective coating. Can be applied to marginally prepared surfaces. Interested in learning more or purchasing this product?MACROPOXY@ 646 Fast cure Epoxy Coating (Part B), Hardener MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 Prospect Avenue N.W. Cleveland, OH 44115 Tele hone Numbers and Websites Product Information Regulatory Information Medical Eme enc Trans nation Emer en 'for Chemical Erne nc …A two-component epoxy polyamide primer. Designed specifically for immersion service under immersion grade epoxies and polyureas, Macropoxy® 240 is a fast-drying coating with an extended recoatability. Interested in learning more or purchasing this product?Aug 15, 2016 · MACROPOXY® 646 Fast Cure Epoxy (Part B), Hardener. MANUFACTURER'S NAME. THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115. Telephone Numbers and Websites. SECTION 2 — COMPOSITION/INFORMATION ON INGREDIENTS. SECTION 3 — HAZARDS IDENTIFICATION. ROUTES OF EXPOSURE. INHALATION of vapor or spray mist. Part A: 1 gallon (3.78L) and 5 gallon (18.9L) containers Part B: 1 gallon (3.78L) and 5 gallon (18.9L) containers Weight: 13.16 ± 0.2 lb/gal ; 1.60 Kg/L mixed, may vary by color S % $ …
Pਮਣਢਲ਼ Dਤਲਢਨਯਲ਼ਨਮਭ. MACROPOXY 646 MR is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and provide mildew resistance in industrial exposures. The high solids content ensures adequate protection of sharp edges, corners, and welds. This prod-uct can be applied directly to ...Part A: 1 gallon (3.78L) and 5 gallon (18.9L) containers Part B: 1 gallon (3.78L) and 5 gallon (18.9L) containers Weight: 13.16 ± 0.2 lb/gal ; 1.60 Kg/L mixed, may vary by color S % $ …
SAFETY DATA SHEET. B58V600. Section 1. Identification. Product name : MACROPOXY® 646 Fast Cure Epoxy (Part B) Hardener. Product code Other means of identification. …A two-component, high-solids, fast-drying polyamide epoxy mastic. Designed to protect steel and concrete in industrial exposures, Macropoxy® 646 epoxy is ideal for maintenance painting and fabrication shop applications. The high-solids content ensures adequate protection of sharp edges, corners and welds. This product can be applied directly ... A two-component, high-solids, high-build, fast-drying polyamide epoxy. Designed to protect steel and provide mildew resistance in industrial exposures, Macropoxy® 646 MR can be applied directly to marginally prepared steel surfaces. The high solids content ensures adequate protection of sharp edges, corners and welds. Get free real-time information on USD/PART quotes including USD/PART live chart. Indices Commodities Currencies StocksMACROPOXY® 646-100 Fast Cure Epoxy (Part A) Mill White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::If you have a GPS device or other portable device that uses an SD card you may need the SD card ID. This is sometimes required to view maps on GPS units or GPS-enabled smart phones...MACROPOXY® 646 FF Epoxy Coating (Part A) Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year ... Please refer to the SDS for additional information. Keep out of reach of children. Do not transfer contents to other containers for storage. Supplemental labelShelf Life: 36 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). MACROPOXY 646 FAST CURE EPOXY is a high solids, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrica-tion shop applications.SDS management, distribution & revision solutions - for every budget. Free access to more than 4.5 million safety data sheets available online, brought to you by 3E. Macropoxy 646-100 Fast Cure Epoxy (Part B) Hardener - Free SDS search
Jan 18, 2021 · product name: macropoxy(r*) 646 fast cure epoxy (part b) hardener product code: b58v600 other means of identification: not available. product type: liquid. relevant identified uses of the substance or mixture and uses advised against: paint or paint related material. manufacturer: the sherwin-williams company 101 w. prospect avenue cleveland ...
Macropoxy 646, Ultradeep MANUFACTURER'S NAME COMPAÑÍA SHERWIN-WILLIAMS S.A. DE C.V. Poniente 140 No.595 Col. Industrial Vallejo, Del. Azcapotzalco C.P. 02300, Ciudad de México, México This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).
MACROPOXY@ 646 Fast cure Epoxy Coating (Part A), Mill White MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 Prospect Avenue N.W. Cleveland, OH 44115 Tele hone Numbers and Websites Product Information Regulatory Information Medical Eme enc Trans ortation Emer en www.sherwin-williams.com (216) 566-2902 …SAFETY DATA SHEET. MACROPOXY® 920 Epoxy Pre-Primer (Part B) Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year. SAFETY DATA SHEET. Product name Other means of identification Product type Emergency telephone number of the company. …Paint or paint related material. Manufacturer : THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115. Emergency telephone number of the company : US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year. Product Information Telephone Number : US / Canada: (800) …MACROPOXY® 646 FF Epoxy Coating (Part A) Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::1 Ct. Macropoxy 646 5.0-10.0 (125-250) 1 Ct. Sher-Loxane 800 4.0-6.0 (100-150) ... Tint 150% tint strength with Maxitoner Colorants only into Part A. Do not exceed 15 oz/gal. ... to prevent early failure in these areas. Do not mix previously catalyzed material with new. HEALTH AND SAFETY Refer to the SDS sheet before use. Published technical ...MACROPOXY® 646 Fast Cure Epoxy (Part A) Safety Red Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::A two-component epoxy polyamide mastic coating. Designed for application to properly prepared steel surfaces, Macropoxy® HS High Solids Epoxy may be used as a one, or two-coat, direct-to-metal protective coating. Can be applied to marginally prepared surfaces. Interested in learning more or purchasing this product?MACROPOXY 985 PART A MIO 802 Section 2. Hazard(s) identification Disposal :Dispose of contents and container in accordance with all local, regional, national and international regulations. Other hazards which do not result in classification:None known. Supplemental label elements:Please refer to the SDS for additional information.MACROPOXY® 646-100 Fast Cure Epoxy (Part B) Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: MACROPOXY® 646 (Part B) - Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B58V600 MACROPOXY® 646 (Part B) - Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:[email protected]
... macropoxy 646 ff is high solids. ... Part B: 1 gallon (3) and 5 gallon (18) containers ... Refer to the MSDS sheet before use. Published ...Free download of Safety Data Sheet. 7 million SDS in 25 languages. Free SDS service for retailers, eCommerce and users of chemicals. ... MACROPOXY 646 Fast Cure Epoxy Coating (Part B) Hardener. Manufacturer Name. THE SHERWIN-WILLIAMS COMPANY. Emergency telephone (216) 566-2917. Icons in PDF. Company Information. Company … MACROPOXY® 646-100 Fast Cure Epoxy (Part A) Mill White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Instagram:https://instagram. fine for no trailer plate in illinoiscaliber collision rio ranchocraigslist bass player wantedgypsy joker Part B: 1 gallon (3.78L) and 5 gallon (18.9L) containers ... Refer to the SDS sheet before use. Published technical data and instructions are subject to change without notice. Contact your Sherwin-Williams representative for additional technical data and ... 1 ct. Macropoxy 646-100 Fast Cure Epoxy 3.0-6.0 (75-150) 1-2 cts. of recommended ... nails 2000 monticello indianadavid paulsen obituary MACROPOXY® 920 Epoxy Pre-Primer (Part A) Transparent Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: palm desert 10 day weather forecast Refer to the SDS sheet before use. ... 1 ct Macropoxy 646 SE-Shop Epoxy 4.0-6.0 (100-150) 1 ct Acrolon 218 HS Polyurethane 3.0-6.0 (75-150) ... combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the …Macropoxy 646 5.0-10.0 (125-250) ... Then combine one part by volume of Part A with one part by volume of Part B. Thoroughly agitate the mixture with power agita-tion. Allow the material to sweat-in as indicated prior to application. Re-stir before using. HEALTH AND SAFETY Refer to the SDS sheet before use.